X
Product Description
Mak Norcam
Grade: B, C, E, G and 22
A range of highly refined transparent inactive cutting oils with extreme pressure properties. These cutting oils are specially developed for wide range of machining operations. They are blended from highly refined high viscosity index muneral oils and carefully selected oilness additives to improve the surface adherence properties
MAK NORCAM E and G are blended with a combination of specially selected extreme pressure additive which provides excellent protection over wide range of load speed and operating temperatures. Being lighter in colour these oils enable better visibility to the operator.
Performance Level
Proprietary grades
Application
These oils are used for machining yellow metals without fear of staining
Suitable for less severe classes of machining on ferrous metals and are excellent for automatic lathes screw cutting machines etc
MAK NORCAM 22 has special chlorinated EP additives and is designed as multipurpose neat cutting oil
NORCAM C is approved by DGQA meeting ZX - 6 requirements
MAK NORCAM E and G oils are recommended for use in wide range of machining operations on medium machinability metals and also for severe operations on certain highly machinable steels and alloys.
Grade: B, C, E, G and 22
A range of highly refined transparent inactive cutting oils with extreme pressure properties. These cutting oils are specially developed for wide range of machining operations. They are blended from highly refined high viscosity index muneral oils and carefully selected oilness additives to improve the surface adherence properties
MAK NORCAM E and G are blended with a combination of specially selected extreme pressure additive which provides excellent protection over wide range of load speed and operating temperatures. Being lighter in colour these oils enable better visibility to the operator.
Performance Level
Proprietary grades
Application
These oils are used for machining yellow metals without fear of staining
Suitable for less severe classes of machining on ferrous metals and are excellent for automatic lathes screw cutting machines etc
MAK NORCAM 22 has special chlorinated EP additives and is designed as multipurpose neat cutting oil
NORCAM C is approved by DGQA meeting ZX - 6 requirements
MAK NORCAM E and G oils are recommended for use in wide range of machining operations on medium machinability metals and also for severe operations on certain highly machinable steels and alloys.
Grade Name | K.V., cSt 40 | Saponification No. mg. KOH/g | Flash Point PMCC, | Sulphur |
MAK NORCAM B | 20.1 | 3.01 | 158 | Inactive |
MAK NORCAM C | 34.7 | 7.3 | 166 | Inactive |
MAK NORCAM E | 13.3 | 4.0 | 180 | Inactive |
MAK NORCAM G | 32.0 | 4.0 | 226 | Inactive |
MAK NORCAM 22 | 21.5 | 2.3 | 166 | Inactive |
Regd. Office
C-328,
Vivek Vihar,
New Delhi - 110095.
STAR LUBES PVT. LTD.
D-185, Sector-10, Noida - 201301, Uttar Pradesh, India
|